Car Builders Premium Spray Adhesive is suitable for all your upholstery projects, from roof linings to carpet. This Spray Adhesive is manufactured right here in Australia and has been tested and proven at 120°C. These highly charge cans feature an easy to use adjustable nozzle which spray out in a thick splatter type pattern. Not to be mistake for fine mist contact adhesive this is an Industrial grade glue that will cover large surfaces.Simply spray both surfaces allow a short amount of time to tack and bond 2 x materials together.Great for Additional strength when using self-adhesive products Installing finished carpet on floors, wheels arches, roofs and walls. Permanent bond on plastics. metal, wood, glass, fabric, flexible foam and paperCoverage 7sq/m per can Note: both adhering surfaces must be coated therefore allow 3.5sq/m coverage per can.Temperature range Effective bonding range between – 16°C and 120°CClean up Clean overspray with Mineral Turpentine or Eucalyptus7sq/m coverage per can Note: both adhering surfaces must be coated therefore allow 3.5sq/m coverage per can.Application should be between 16°C – 27°C.Spray about 10-20 cm away at a 90 degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched. Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.
